About Carson Manufacturing

HOW A US FIRM INNOVATED THE BEST PLANETARY GEARHEAD DESIGN

Carson Manufacturing is a family-run planetary gearhead manufacturing company in the USA

This is the redesign that changed planetary gearheads forever

More than 25 years ago, Carson Manufacturing set a new industry standard by redesigning and revolutionizing the design of planetary gearheads. In the following more than two decades, so many other companies have followed in their path that the method is now standard.

However, this family-owned company based in Nevada was the first to reconfigure the structure of a planetary gear to deliver a quality product that lasts longer, costs less, and outperforms the competition.

So, how did they do it?

By using a bearing holder rather than a housing, the Carson design creates a concentric force along the centerline of the device, which aligns the gears more effectively and ensures optimum manufacturing.

When the company implemented that design change in 1996, it was the result of three-generations working together: Eddie Capps, who purchased the company with his wife, Barbara, their daughter, Delores Stacy, now Carson Manufacturing’s vice president, and her son, Kenny Penn, the sales engineer. This family-owned company continues to work with an expert team of individuals, many who have been with the company for 20+ years.

Today, Carson Manufacturing continues to innovate and strive for excellence. Its team of engineers, machinists, and assemblers are a significant contributor to improving planetary gearhead technology.

After 48 years of operations, the company is well-known, a leading manufacturer of planetary gearheads. And, of course, the innovation didn’t stop in 1996.

The company has its own internal research and development division where new the design of planetary gears is improved upon and ultimately perfected.

In fact, the company can engineer planetary gearheads to mount practically any motor for any ratio, configuration and size.

Additionally, because Carson Manufacturing understands how important it is to have the right part engineered correctly, they support their clients by not charging a design fee for custom planetary gearheads, which no other planetary gearhead company does.

Whether the company is researching new ground-breaking technology or improving on current products, each design is strenuously tested under multitudes of conditions, technical specifications, and requirements.

CARSON MFG. INC.5001 Grumman Drive
Carson City, Nevada 89706
PH: 775-883-3366
FX: 775-883-3391
EM: info@carsonmfg.net
Request a Free Gearhead Quote
Carson Manufacturing can engineer planetary gearheads to mount practically any motor for any ratio, configuration and size. Additionally, because Carson Manufacturing understands how important it is to have the right part engineered correctly, they support their clients by not charging a design fee for custom planetary gearheads, which no other planetary gearhead company does.

Different planetary gearhead systems designed for different needs

As a result of this commitment to improvement and excellence, Carson Manufacturing has continued to evolve its line of planetary gearheads, including:

Precision Series Planetary Gearheads

The Precision Series is Carson’s high-end line of planetary gearheads designed for the most strenuous applications. The Precision Series is made in sizes 17, 23, 34, 42 & 56 with standard ratios from 3:1 to 100:1; however, Carson can produce ratios up to 10,000:1. The Cadillac of Carson’s planetary gearboxes, the Precision Series features a dynamic radial shaft seal at the input and output and an enclosure rating of IP65. The operating temperature ranges from -20°F to 250°F.


Carson Manufacturing is Trusted by

Boeing, a Carson Manufacturing Client
Parker, a Carson Manufacturing Client
Attabotics, , a Carson Manufacturing Client
MAS-HVAC, a Carson Manufacturing Client
Embry Riddle Aeronautical University, , a Carson Manufacturing Client
In-Position-Technologies

“Thank you for your superior product, technical service, and partnership over the last three years.”

Mark Poje

Attabotics Supply Chain Manager

The Precision Series also features a hard-anodized rear and front brackets with a surface hardness of 60 rockwell, an alloy steel powder coated ring gear, quality sealed radial ball bearings, and stainless steel output shaft. Throughout, there is hardened precision gearing. A precision clamp on the pinion with four clamping screws eliminates slippage.

Eliminator Series Planetary Gears

The design that changed it all was the Eliminator Series, Carson’s affordable high-end line of planetary gearheads designed for strenuous applications. The Eliminator series shares many of the same features with the Precision Series but comes in sizes 17, 23, and 34 with standard ratios from 3:1 to 100:1. The firm can also produce ratios up to 10,000:1.

“S” Series Planetary Gearheads

The “S” Series is Carson’s most economical line of planetary gearheads designed for light-duty applications. However, it still delivers the same quality and reliability that Carson promises of all its planetary gearheads. The “S” Series comes in sizes 17, 23, and 34, with standard ratios from 4:1 to 100:1, with custom rations available up to 10,000:1. The “S” Series features an IP54 enclosure rating.

Right Angle Series Planetary Gears

Carson offers two lines of right angle planetary gearheads: the Right Angle Eliminator (RE) and the Right Angle Precision (RP). The Right Angle Eliminator comes in sizes 17, 23, and 34, while the Right Angle Precision comes in sizes 17, 23, 34, 42, and 56. Both have standard ratios from 3:1 to 100:1, and custom ratios can go up to 10,000:1. Both lines of right-angle series planetary gears include the same features, an enclosure rating of IP65, an operating temperature range of -20°F to 250°F, and hardened steel spiral miter gears.

Custom Designed Planetary Gearheads

From slight modifications in existing designs to complete custom gearheads built-to-suit, Carson helps clients around the world engineer and develop the planetary gearhead specific to a project. From gearheads that help detect cancer and other diseases to those that improve the production of paper, the breadth and depth of Carson’s development capabilities are impressive.

Behind each gear is a team committed to delivering total customer satisfaction while staying on-time and on-budget.

To learn more about why Carson Manufacturing is the original, not-to-beat, designers and producers of planetary gears, contact a Carson representative today.

Carson Manufacturing Works Tirelessly For Your Success

We understand that the success of your business and machines relies on reliable, planetary gearheads done right, on budget and on time. Because we are committed to your success and want to ensure you have the best result, if your project needs a custom design, we won’t charge you for the design, unlike other manufacturers. And, each and every design is strenuously tested under multitudes of variable conditions and under various technical specifications and requirements. 

  • Our gearheads are the result of 40+ years of industry research, development, and testing
  • Every design is strenuously tested in our internal research and development division
  • No design fee for custom gearheads to fit customers machine specifications
  • Always arrives on time, on budget
  • Manufactured 100% in the USA 

Carson Manufacturing Has Been Featured On…